We offer installation of oil boilers, oil tanks and oil fuel lines. As well as annual servicing and break down repairs.
WHAT IS IT?
An oil boiler works in a very similar way to a gas boiler. The fuel, in this case oil, is ignited in the combustion chamber and a heat exchanger warms up cold water, either from the mains in a combi system or from a cold water tank in a conventional system. The heated water can be used in your radiators, taps and showers to provide your home with heating and hot water.
HOW IT WORKS?
An oil boiler should reach the same efficiency as a gas boiler. According to building regulations, oil boilers must have an energy rating of at least 86 per cent, or A+. A condensing oil fired boiler will usually have an efficiency of 90 per cent or higher. Oil is a more efficient fuel than gas. This is because oil boilers use nearly all of the heat and additional gas that’s created from the burning of fuel, turning this into extra heating energy so there’s less wastage. This means you’ll get a good return on every unit of energy.
The oil tank should be located on your property and there are certain installation regulations that need to be followed. The base of the tank must be strong enough to support the weight of the tank and its contents. The tank must sit on solid ground, either concrete or paving slabs that are at least 42mm thick and that extend out at least 300mm beyond the perimeter of the tank. If the tank is located quite close to your house, a fire wall must be positioned between the tank and your home.